ds21305 rev. d-2 1 of 2 pbl401-pbl407 pbl401 - pbl407 4.0a bridge rectifier features case: molded plastic terminals: plated leads, solderable per mil-std-202, method 208 polarity: symbols marked on case approx. weight: 5.6 grams mounting position: any marking: type number mechanical data diffused junction high case dielectric strength of 1500v low forward voltage drop, high current capability surge overload rating to 150a peak ideal for printed circuit board application plastic material - ul flammability classification 94v-0 ul listed under recognized component index, file number e95060 single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. maximum ratings and electrical characteristics @ t a = 25c unless otherwise specified - + a b c e g h d pbl dim min max a 18.50 19.50 b 15.40 16.40 c 19.00 d 6.20 6.50 e 4.60 5.60 g 1.50 2.00 h 1.30 typical all dimensions in mm characteristic symbol pbl 401 pbl 402 pbl 403 pbl 404 pbl 405 pbl 406 pbl 407 unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r(rms) 35 70 140 280 420 560 700 v average rectified output current @ t c = 75c i o 4.0 a non-repetitive peak forward surge current, 8.3 ms single half-sine-wave superimposed on rated load (jedec method) i fsm 150 a forward voltage per element @ i f = 3.0a v fm 1.1 v peak reverse current @t c = 25c at rated dc blocking voltage @ t c = 100c i r 10 1.0 a ma i 2 t rating for fusing (t < 8.3ms) (note 2) i 2 t 166 a 2 s typical thermal resistance, junction to case (note 1) r q jc 19 k/w operating and storage temperature range t j ,t stg -65 to +125 c notes: 1. thermal resistance rom junction to case per element mounted on pc board with 13 x 13 x 0.03mm land areas. 2. non-repetitive for t > 1ms and < 8.3ms. power semiconductor
ds21305 rev. d-2 2 of 2 pbl401-pbl407 0 1 2 3 4 5 20 40 60 80 100 120 140 i , average output current (a) o t , case temperature (oc) fig. 1 forward current derating curve c single phase half wave 60 hz resistive or inductive load 0.01 0.1 1.0 10 0 20 40 60 80 100 120 140 i , instantaneous reverse current (ma) r percent of rated peak reverse voltage (%) fig. 4 typical reverse characteristics, per element t = 100c c t = 25c a 0 50 100 150 200 250 1 10 100 8.3ms single half sine-wave jedec method i , peak for ward surge current (a) fsm number of cycles at 60 hz fig. 3 max non-repetitive peak fwd surge current 0.01 0.1 1.0 20 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 i , instantaneous fwd current (a) f v , instantaneous forward voltage (v) fig. 2 typical forward characteristics f tj = 25oc pulse width = 300 ms 2% duty cycle 10
|
